PPGS Physics and Length of Clubs

Wed, 08/21/2013 - 14:00 -- Don Trahan

If every club in your bag was the same length, would golf be an easier game? That's the question Eric Lans submitted after reading about a type of golf system that encourages golfers to keep the length of their clubs identical.

Although this theory may sound good, it doesn't take into account the physics of a golf swing and the importance of different shaft planes for each club.

Hi Don,

I am a retired Dutchmen (73) living in the utmost southwestern corner of Spain near the Portuguese border. Started learning golf 5 years ago and always followed the PPGS system. Feeling confident and content with the results achieved with your system. I now consider replacing my "rookie" half set of golf clubs by a new set of golf clubs. I feel I can do better by replacing my half golf set. My question is: How do you judge and look at the idea of using the 1 Iron Golf set? The arguments used in their website appeal to me. I do not have the opportunity for a try out. This set has to be specially imported and I might waste good money. There are no qualified club fitters in the region where I live. What advice would you pass on to us lovers of the game called golf?

I appreciate your website very very much!
Eric Lans

My advice on this topic is simple. Get to a PPGS certified club fitter and you'll see why each club needs to be a different length.

Keep it vertical!

The Surge

If you can't view the YouTube video above try CLICKING HERE. You must allow popups from this site for the link to work.

Comments

eyedunno's picture

Submitted by eyedunno on

Don, I think you are off base on this issue. I have had a set of 1 Iron clubs for over 2 years. Mine worked out to be based on the length of my old 7 iron, the club that I actually hit the best in my set of incremental length irons. Gee, I wonder how that worked out to be the length? Each of the irons have 4 degrees of loft difference and on average hit about 10 yards different. So instead of having 9 different ball positions I only have 1 ball position for all my irons. Saying the length of the shaft makes a difference is hogwash. Consistency is what we are after in this game and the 1 Iron single length irons provides that. I'm not saying they are the end all for golf but it sure seems that looking at a lot of pros golf bags the irons look pretty even sitting in the bag.

Steve Smith's picture

Submitted by Steve Smith on

I would agree with you that he was off base (and I've never hit those clubs).

Most people can't hit any iron over a 6 iron very well anyway (because they're too long) and would swing the club more confidently and hit the sweet spot more often if the long irons were the same length as the mid irons.

For that reason they might very well actually hit the "long" irons longer if they were shorter. Important to note they are also designed the same weight so we can't just cut down our current clubs or choke down on them and expect the same results. Note: Some early attempts at "same length irons" didn't take weight into account.

Don has long accurately espoused that most of us might actually hit a 44" or 43" driver longer than a 46" or 45" driver because we can handle the shorter club better and hit the sweet spot more often. I also add that we get the un-measurable benefit of added speed with the shorter shaft just from being more confident in turning it loose freely.

There is no doubt that a longer club will hit the ball further than a shorter club IF (and that's a huge IF) the player can handle the length as well as a shorter length.

We can't judge those clubs (or any other clubs) based on what a very good player would do with them. We have to take into consideration what the weaker player would do with them.

I hit my long irons very well and wouldn't be interested in having them be shorter but I know many players that are pretty good up to a 7 iron but very weak with anything longer than that. Those players would probably benefit from the 1 Iron system.

P.S. They also advocate shorter fairway woods and driver just as Don does.

Are they for everybody? No, especially the better players.
Could they help some? No reason why not since they can't hit the long irons anyway.

Terry Medley's picture

Submitted by Terry Medley on

Steve, Read you comments with interest and agree with your statements, As Stated. However, I did not see any reflection between the longer off the rack so to speak I-iron set clubs, and a Properly Fitted longer iron built by a quality club fitter. I agree that most hackers who hit their off the rack improperly fitted long irons poorly, might benefit from shorter irons with more percission sweet spot hits, even if those were off the rack so to speek, one size fits all catagory. But, would they benefit even more from a properly fit long iron built by a cirtified club fitter. That's the true question. With a choice between off the rack individual lengths and off the rack one iron lengths, you are probably correct and the avg player might just be better off with the 1 iron set. However, given a a third choice of personally built to fit properly fitted irons, I think they would benefit by going with the fit set over both the other two choices. Just my opinion.

Robert Meade's picture

Submitted by Robert Meade on

Hey Terry, I have something I wanted tell you about off blog. I thought I hadyour e mail still but lost .it along the way. If you could get it to me Through Doc that would be great. That or I can have mine sent to you through Doc.

Thanks,

Robert Meade

Terry Medley's picture

Submitted by Terry Medley on

Robert: I believe Doc should already have my email, but just in case I will forward it to him again.

jon.lucenius's picture

Submitted by jon.lucenius on

EyeDunno - thanks for your reply to this. I have been considering getting the same type of golf clubs from the same company. I hit the 8 & 9 in my bag the best, and they are the same length. Yeah, shorter clubs are easier, and I am believing that this applies to the whole set. Question, what about the longer irons, do you carry more woods or use the 3/4/5 irons.

Don - I love the PPGS system, it works and I tell everyone I know about it. They see the improvements in my game and I gave you a lot of the credit. Can you clarify something for me in your video. My question surrounds when you stated about the vertical plane being better. True - a flatter plane is harder to maintain from a physics point-of-view, you need more energy. If the clubs are all shorter, is not this set then easier to swing with the less lofted clubs (5-4-3) more accurately, and will that accuracy offset the loss of club head speed (they are essentially modeled after a 7-iron I believe)?

I am trying to decide between getting the 1 Iron Golf Set or going to Doc and getting a set of irons. My decision time is 5 months away (xmas timeframe). And yes, it is a compelling argument but I don't like being "shafted" : )

Lately swinging very well, thanks to all I have learned here.

Down the middle,
Jon

jon.lucenius's picture

Submitted by jon.lucenius on

Does anyone here play online on World Golf Tour? http://www.wgt.com/ is the URL. I have been playing for a few years now and I find the physics in that simulation annoyingly realistic. Coupled with real course images it is quite the experience, much different than a computer game or a console like the Wii.

When I first started, I played worse than in real life. Recently that has reversed, because I have better equipment and have really learned how to think about shots and course management. Great. The reason I bring this up here is that I find what I learn in WGT actually now HELPS me on the real course. I think about proper planning more (you really need that in WGT at higher levels), the effects of the elements/physics etc. Does anyone else find the same thing and/or am I crazy (about this : ).

Thanks and keep it down the middle wherever you play,
Jon

PS - if you are on WGT and want to shoot a round or two - my nickname is headhacker.

reedclfd's picture

Submitted by reedclfd on

Jon: For what it's worth, here is my take on the 1-Iron clubs. I played a full set of them for three years. Positives: same length, same weight, same swing, same ball position. Negatives: steel shaft, loss of "feel", shorter distance, same club-head speed. For comparison, I had Doc Griffin build me a driver, same length and loft as the 1-Iron driver (43", 12*), but with a shaft that ACTUALLY fit my particular swing (same cost as the 1-Iron driver). I GAINED 20-25 yards with the custom "Doc" driver and hit it much straighter than I ever hit my 1-Iron driver. Then, using his "long-distance fitting program", I had Doc build me a set of clubs that actually fit me, including some hybrids, a few irons, and two wedges, all with graphite shafts that Doc determined would be best for MY particular swing, and at very near the same cost as the 1-Irons. I hit Doc's custom-built "arrows" much, much better than I ever hit my 1-Irons. And I only use 1 swing and 1 master set-up position for every shot. Plus, my club-head speed increases as the length of the club increases, so my yardage gaps are consistent and automatic. There is no comparison between the 1-Iron clubs and custom-built clubs; the custom-built clubs are far superior, for nearly the same cost! And you can have Doc build your clubs 1or 2 at a time, as you can afford them. Take care, R2

Robert Fleck's picture

Submitted by Robert Fleck on

I play, though generally only the free tournaments. I'm not willing to spend actual money on a virtual game to get enough "points" to buy the really good equipment, so I can't make it to the Legend status stuff, I'm just a Master. I'll send you a friend request on there, though, and maybe we can hook up for a round sometime.

It definitely does help with your ability to plan out a hole. Knowing where you need to hit a shot, or choosing when to under club because your driver will run you through the fairway, or whatever. Some of the programming makes me nuts, because I know I could hit certain shots in real life and the game won't let me. ;-)

jon.lucenius's picture

Submitted by jon.lucenius on

Wow - totally free and you have made it to Master. Good job - you must know your equipment very well and the game. I had the same beef with the game about "oh man, this was sooo easy yesterday at the course, little shot up and close to the hole, if only I could here on WGT as well." If you do care to spend the money on little better clubs and somewhat better balls, you'll find you can hit the shots you want - (most of the time of course - too many random factors about).

Started out as the game over or at my handicap (frustrating) - then about equal (fun but equally as frustrating) - and now I am in the low 60s for average and spend more time target focused and planning - which has paid off.

CAVEAT - I do end up spending a bunch more than I like but I am always willing to pay for something well done, especially software where someone has put the time in the code to make it do what you think is right. They have - I find the physics behind what they do amazing at times, and it takes a trip back to the real course to realize that this is a hard game to code with so many variables.

Now if I can only get a precise 156 yd swing on my real clubs on the course!

Thanks - I am headhacker and would welcome the round.
Jon

Robert Fleck's picture

Submitted by Robert Fleck on

I have done surveys to earn free points from time to time so I upgraded my equipment a bit and I can use moderately better balls than the basic.

Of course, I'd love to have the same sorts of overviews on real courses that I can get on WGT for planning out shots. ;-)

jon.lucenius's picture

Submitted by jon.lucenius on

Smart way to go and thanks for the friend invite. I am usually on evenings EST from 10-2 or so.

When I went to the US Open @ Merion I used the online version to scope out the best places to watch the action and it worked well. I am going over to UK next year and can't wait to play St Andrews for real.

My email address is jon.lucenius@gmail.com so we don't have to continue on the Surge's forum!

jon.lucenius's picture

Submitted by jon.lucenius on

R2 - thanks for the comments - both positive and negative on the 1 Iron Golf clubs. What you said makes sense, and I basically need to think about what I want to do given all the information presented.

What I am reading is that in order to maintain the proper gaps between the clubs I would have to adjust my club head speed to make up for the same/shorter shaft lengths.

Cheers,
Jon

Robert Meade's picture

Submitted by Robert Meade on

Jon, manually or purposely "trying to adjust our clubhead speed" would be hit and miss and an inconsistent way to make up for same/shorter shaft length. The best golfers have a tempo that is nearly identical and buttery for every swing and and every club. Think of Ernie and Freddy and In Bee Park. They rarely ever look like they swing harder or faster on purpose. Swing speed increase happens naturally as the clubs get longer. This is not from added effort but happens because of physics. Distance variance comes from length and loft differences. See my other discussion for more details.
More for you to chew on..............

jon.lucenius's picture

Submitted by jon.lucenius on

Robert - your comments and insight are greatly appreciated as always. I have a few months to make the right decision. A consistent swing is what I am after so thanks for that reminder. If we swing each club the same way, the physics of the club design will take care of the rest. That makes sense!

Play on WGT by any chance?

Todd's picture

Submitted by Todd on

I am a great fan of Don and his PPG swing. I have been to a 1 day school with Dave Seeman and have great respect for their teachings. However, I am also a great fan of my 1 Iron golf clubs. I have perfect yardage gaps and the clubs help to inhance my PPG swing. They have been the final peice of the puzzle for me. Was a 12 handicap, now a 5 handicap. PPG swing and 1 Iron clubs are great together.

dgaines's picture

Submitted by dgaines on

Todd,
I am curious as to how long you have had the 1iron clubs and how long you have been doing the PPGS. Did you buy the clubs after going vertical or before? If before, did Dave Seeman look at them when you did his 1 day school?
And, Congrats on the big improvement to your game.
Dan

Todd's picture

Submitted by Todd on

I have been a PPGS student for 3 years.
1 Iron club owner for 6 months. 2013 golf season.
Dave Seeman did not see me swing with the 1 Iron clubs.
I had properly fit clubs at that time. Not fit by Doc Griffin, but the closest I could come to in my area.

Terry Medley's picture

Submitted by Terry Medley on

Todd; I am glad that the 1-iron clubs are working for you, and for anyone else who has gained improvement with them. Still, that is not a true comparison between them and a properly fitted set, Unless you were to give a properly fitted set the same trial period of comparison. As I stated, I believe that a 1-iron set may well help the avg guy, but will they help as well as a properly fitted set of irons, that is the question at hand. Unless you have used a set of irons properly fitted by a certified PPGS Fitter, and are comparing them to the 1-iron set for an equal trial period, then you are not comparing apples to apples. I still maintain that what Don has said is correct when comparing apples to apples.

Todd's picture

Submitted by Todd on

I had been fit by Miles of Golf in Michigan. A 1 hour fitting for Irons, a seperate 1 hour fitting for Driver and woods. This was not a Doc Griffin fitting, but the closest I could find in my area. The properly fit clubs were a great improvement over what I was using. However, the 1 iron clubs were an improvement, for me, over the "properly fit set". L Wedge 90 yards up to a 3 Iron at 190 yards. perfect gaps and same smooth PPGS swing.

Robert Meade's picture

Submitted by Robert Meade on

Jon, here's a chart example you may find informative.

http://blog.hirekogolf.com/wp-content/uploads/2011/04/2011_golf_club_length_slides_final.pdf

The above club fitting chart(s) is very interesting and one of the key points that is often incorrectly known by the general golf public is club and club head weight INCREASES as we go from longest to shortest. You'll notice in the length vs. head weight chart (SEE PAGE 20 above) that the driver is normally the lightest club in the bag and the wedges are the heaviest. Surprised? Actually the putter is often the heaviest club weighing over 300 grams. Especially lately as 'heavier' putters have become more popular. Why is the driver the lightest club and the wedges the heaviest?
Quoting Ralph Maltby (a club making and fitting guru), "In order for a set of clubs to have the same swingweight, as each club gets shorter, each clubhead must weigh incrementally more to maintain the same swingweight or club balance." This is important because it allows the golfer to have a similar feel with each club while using the same swing and tempo. It is true that as the clubs get longer we automatically increase our clubhead speed. And here is the important point, it is both the increasing length of the club AND the decreasing loft of a club that are the combined reasons for hitting the ball further. This is where Eyedonno is off saying that "club length is hogwash" when it comes to effect on distance. As R2 said, he hits his clubs built by Doc much further than he could with the 1 iron length clubs.

Again quoting Ralph Malby, ".... the 1/2 inch length difference (between each club) is also the equivalent of approximately 5-7 yards DISTANCE DIFFERENCE."
The length of the club absolutely effects distance. Loft difference of 4* accounts for another 5-7 yards giving us the 10-15 yard difference between clubs.

Jon, the danger of feeling the need to swing harder to gain more than the 10 yards that Eyedonno mentions is that any conscious difference in attempt to increase clubhead speed or power in our swing when playing golf often ends up with a chink,thin, too far or too short, right of or left of target result! Ultimately our tempo and timing needs to be the same with each swing regardless of which club is in our hands. In fact in a fitting, our tempo would be one of several factors considered by a top fitter.

http://www.mizunousa.com/golf/innovation/performance-fitting-system

That was not a recommendation for a Mizuno fitting just an FYI.

Having said that I agree that if the 1 iron length idea works for Eyedonno and some others that is fine for them. I do understand the logic and agree that the longer clubs are normally the toughest to hit for many.It is true that as a general rule, the longer clubs are more difficult for both direction and distance and that is hitting the center of the face (or sweet spot) becomes more challenging. Keep in mind it is not only the longer length that makes it more challenging but less loft. And yes, Doc and Surge both agree that a 43 inch driver is easier to consistently hit 'em longer and straighter than using a 45/46 inch driver. The same logic applies to the fairway woods, hybrids and 3-5 irons. So some choose to make the increments only 1/2 inch between clubs rather than a full inch. Others will also go 5 degrees of loft variance between irons 9-5 rather than the typical 4. This helps make the distance gaps bigger for those with slower swing speeds.

Ultimately I prefer the more traditional length increases rather than the single length concept because the length does contribute to distance and I want to be able to hit my 5 iron 175 and my 4 iron 190-195 and my woods 205-230 and my driver 240-250. If they are all the length of my 7 iron that's not happening.

My vote would be for Jon and anyone else to get a fitting by a certified PPGS fitter. I did and love the clubs and results.

jon.lucenius's picture

Submitted by jon.lucenius on

Awesome slides on fitting. Many of these points and more have been detailed by Doc as well!

Thanks for all the data and writing - much appreciated.

Robert Meade's picture

Submitted by Robert Meade on

You are welcome Jon. Yes Doc's site is great for giving anyone a good grasp on how he much he puts into a "real" fitting. I do have an interest in the data too. As you agreed, it does come down to a consistent swing and having incremental lofts and lengths and then as Surge recommends- the same swing for all clubs especially when it comes to tempo and timing is important if we really want consistency. Once I calibrated how far I hit each club on average it became much easier. For example, under normal conditions hitting a straight shot (not trying to fade or draw) I hit my gap wedge 100 yards. I hit my 8 iron 140 and my 4 iron 190-195. Same goes for the rest of my clubs. I know how far I hit my sticks with a normal effort swing. Once you have your clubs fit and then measure your efforts with a laser and gps you will get familiar with your gaps too. Then you will know when it is you and not the clubs.

As for the WGT. I messed with it a couple of years back but haven't since then. I may look at doing it again you're tempting me:)

jon.lucenius's picture

Submitted by jon.lucenius on

Thanks Robert et al - if the decision had to be made today, I'd go with Doc and his custom fitting and clubs. Thanks for saving me the trouble. That was my plan a year or so back, but I got sidetracked by that other site and did not fully consider all the variables (apparently).

I am not sure what has got more appealing about WGT, I too joined a few years back in 09, and left after a while. A friend got me back into it and now after a year or so of consistent application I have made the Legend tier and I am loving it. Makes me think about the physics of golf more which is what I like. Also, I have better computer equipment to run it on so that may help as well. Let me know - I'd like to shoot a round or two sometime.

kcochrane40@hotmail.com's picture

Submitted by kcochrane40@hot... on

First, a few things to put my comments/observations into context:
1) I am not affiliated in ANY way with the 1-Iron system. Anything I say in defense of them is not an effort to promote them.
2) I own and played 1-Irons for about three years and then shelved them.
3) I am a hobbiest clubfitter who is moving progressively into the clubfitting business. I believe wholeheartedly in being fitted for clubs, and I play fitted clubs.
4) I play about mid-70s golf -- sometimes higher, sometimes lower.

I can guarantee (yes, guarantee!) that the lengths that you will hit constant length (CL) clubs will be nominally different from your "regular clubs." They may not differ at all (some people will even hit them longer). All this discussion of "you'll hit your long irons so much shorter and your short irons so much longer" is CRAP. People will use misinterpreted, armchair physics to prove that it won't work and will tell you that "if it worked, the big guys would be doing it." It's amazing the number of arguments that you hear about how they won't work that come from people who have never even held one. How can I guarantee that they play the same? I PLAYED them. Not for an afternoon, or for a week, but for 3 years. Guess what? I hit my sand wedges of my custom-made Snake Eyes and custom-made SMT 303s about 103 -105 yards. I hit my 5-irons about 185. Guess how far I hit the 1-irons? EXACTLY the same yardage. (In fact, I like the wedges so much that they're still in my bag.)

As for the physics, there is very little difference to speed that the "weight on the string" travels when you vary the length of the pendulum 1/2". Remember, that's a 1/2" over quite a length. The variance between irons due only to the length is minimal; a couple of percent at most, which translates into a couple of yards. The primary elements of distance is loft, contact with the sweetspot, and swing speed. The slight difference in the shaft length will affect swing speed very little. (Some people will even pick up swing speed with a shorter club and most people will increase the tendency to hit the ball on the sweetspot. These people will actually gain distance.), So, the primary driver of distance will be loft, which is adjusted in the single length set to account for the small loss in swing speed (or gain, in the shorter irons).

(Robert, I would be interested in the source for Ralph Maltby's claim that ".... the 1/2 inch length difference (between each club) is also the equivalent of approximately 5-7 yards DISTANCE DIFFERENCE." I can't find that in his book Golf Club Fitting and Performance and I would love to query Ralph on this. Every other "study" I have read has placed this effect much lower. David Tutelman, a golf physics guru, says, "***Over the 3i-PW sets***, the constant-length set show a "range compression" of 10 yards compared to a conventional set. That is, the range covered by the constant-length set is about 10 yards less than the conventional set. About a third of the range loss is in the gap between the 3-iron and 4-iron. This is probably because a low-lofted iron needs the extra clubhead speed, in order to apply the spin to keep the ball in the air." http://www.tutelman.com/golf/clubs/OneClub.php).

So, if I believe in the 1-Iron approach, why don't I still play them? I don't like the look of them when I stand over them. Seems silly, but that's just a fact. I also don't believe, as David Lake professes, in a one-shaft-flex-fits-all approach. Now, don't get me wrong -- I don't believe shaft flex makes as much of a difference as most people think. Tom Wishon places it at about the 5th most important club characteristic when fitting a club. It's not totally unimportant, I just think that shaft flex has more to do with feel than it has on ball flight. I don't like the "boardy" feel of the 1-Iron shafts. (For those of you who think shaft flex is a huge deal on ball flight, check this video out: http://www.youtube.com/watch?v=MDaKUHxk0I8. This guy swaps out a XS men's steel shaft and a ladies graphite shaft on the same iron head and tracks the difference on a Trackman. Very interesting.)

More than anything, I find it very interesting that Don is so quick to jump on the anti-CL bandwagon. I say that for two reasons:

1) The whole PPGS, anti-rotational swing, depends on people accepting that the status quo isn't necessarily right. Just because I can find a whole bunch of VERY knowledgeable, VERY good golfers who tell me that the PPGS doesn't make sense, doesn't make them right. Just the other day I had a teaching professional tell me, "You know, if you didn't bow your legs like that and you took more of a backswing, you'd hit the ball farther." He, like Doc Griffin, had a great explanation based on his understanding of the golf swing. He also, like Doc, has plenty of evidence that he can point to by just turning on the tour. I choose not to believe him because I have actually tried the PPGS and I know that it works.

2) The 1-Iron system fits so well with your PPGS philosophy. I would have thought you would have been all over this like ugly on an ape. While it is true that the lie angle addresses the issue of changing club lengths, hitting a longer shaft length club consistently on the "sweetspot" is more difficult. That's proven over and over. (You even expound on the virtues of a shorter driver for this very reason. Why would you think this wouldn't be the same for a 3-iron versus a 7-iron?) I can also say that hitting a longer shafted club with the PPGS is more difficult. I know that you're going to respond by saying, "the ball doesn't know what club is hitting it" or "the hands don't know what club its holding." But all you need to do is go through the questions you receive and see how many people have more difficulty swinging the driver with the PPGS. The longer length club has a tendency to "lay off."

CervezaFria's picture

Submitted by CervezaFria on

Hi Cochrane,

I came across this list of stats aggregated from Trackman.

http://www.andrewricegolf.com/tag/clubhead-speed-on-pga-tour/

The author claims that an increase of 1mph increase in clubhead speed equates to almost 3 yards in carry distance. He also claims that a one inch increase in club length can increase clubhead speed by as much as 4 mph.

This aligns with Robert's statement that a one-half inch increase equates to a 5-7 yard increase.

Robert Meade's picture

Submitted by Robert Meade on

Kc,

I really enjoyed your heartfelt expressions about the 1-iron clubs. Your references to Tutleman and Wishon are compelling and I have great respect for both. I frankly have no personal experience with the 1-iron and have no reason to doubt that they are a great choice for some or perhaps many. I also did not mean to convey any strong argument against they're use. I agree 100% that we would all be better off if we could more consistently hit the sweet spot and a constant length and set up obviously works toward that end.

As for the references from Maltby, I will include them here. they are from his
'Complete Book of Golf Club Fitting & Performnace- The Principals, Procedures and Playability Factors' by Ralph Maltby 2011.

Quote is from page 233

" The 4* of loft is equivalent to approximately 5-7 yards distance difference and the 1/2" length difference is also is also equivalent to approximately 5-7 yards distance difference. Both of theses added together mean there is 10-14 and sometimes even 15 yards between each club."

Now in all fairness I will add that Maltby emphasizes more than once in this vast 740 plus page book that the longer a clubs length, the harder it is to hit; and the less the loft angle the harder it is to hit. It is especially more difficult for the average player to hit the horizontal center of gravity as the clubs get longer. He teaches and I agree that fitters need to focus on the golfers ability (skill level) to hit the ball in the middle of the club face which can be verified using impact decals and/or launch monitor data. However he along with Wishon believe in incremental increases in length.
I agree that for many shorter is often better. No argument. That is why when building my wife's clubs I went an in shorter than the so called standard on all of her longer clubs. She too may vary well benefit from a one length set. Though I have to say she is making great progress with her current sticks and her driver, a Maltby Lady Tech 15* with an LL shaft shortened to 42 inches and her 39 inch 20 degree Cleveland hybrid Mashie are ones she's really striking well. Her favorite iron normally is her 5 iron, also the longest iron in her bag at 37 inches.

As Surge said, there will always be a market for the same length concept and as your personal experience shows, it is a good viable option. Thanks again for sharing your experience with us and good luck with your club making exploits. I'm a club making hobbiest too and having fun with it.

kcochrane40@hotmail.com's picture

Submitted by kcochrane40@hot... on

Interesting, Robert. I'm going to have to give those pages a good read.

It is interesting that you built your wife's clubs a bit shorter in the long irons. It is a concept that I have been strongly considering for my own clubs. I want to investigate the TLT approach by Dan Connelly. Dan's mantra, "do you find your long irons a bit too long and your short irons a bit too short" really hits a chord with me. I've always felt that. Anyways, it's good to hear your thoughts.

(P.S. I read quite a bit of Wishon stuff, and I don't *think* (and I emphasize that word) I've ever really heard him really say anything negative about the single length topic. In fact, I get a sense that he actually believes that there is merit to the approach. He said that he would never attempt to create a set of heads to accommodate a single length set because the market just won't accept them. He cited the Tommy Armour EQLs and discusses their failure not because they were ill-conceived, but because "the concept of all woods and all irons being the same length was much too radical for golfers to accept." To be fair, however, he said that the other reason they failed was that while the clubs achieved a perfect MOI match, the MOI was not tailored to the individual golfer. I think the 1-Irons have the same flaw. I'm going to buy a set of Pinhawks and play around with them a bit. I think that if you can find the a shaft/grip combo that you like and then fit them to the MOI that suits your swing, a CL club makes a lot of sense (down to the 5- and maybe 4-iron).

kcochrane40@hotmail.com's picture

Submitted by kcochrane40@hot... on

I know my previous message was already long, so I apologize, but I wanted to add that I don't believe the single-length mantra that you will find it easier to hit your 3- and 4-irons. Frankly, in order to get these irons, at the shorter length, to fly as far, David has had to strengthen the lofts too far. The 1-Iron 3-iron is 19*. Considering that this is played from centre of stance, I think the effective loft is even lower. Most people can't hit anything with that low of a loft. That being said, I believe some of the OEM clubs this year have 3-irons with lofts as low as 17*!!! That's a 1980s 1-iron, which, according to Lee Travino, not even God can hit. That's why we now use hybrids, and I think the same thing would be true for a set of 1-Irons.

The greatest benefit of the constant length iron is that they all feel the same. I suspect, Don, that what you were alluding to in your video about the lengths Doc makes your clubs is that he is not using the full 1/2" increment in order to MOI (moment of inertia) match your clubs. For those of you unfamiliar with this, it is a different approach to swing-weighting to make your clubs consistent. With consistent MOIs, each club takes the same effort to swing and feels the same. Constant length clubs do that naturally. Since all the shafts, grips, and heads weight exactly the same, the MOI across the set is EXACTLY the same.

Finally, for beginning golfers, the beauty of single-length clubs is that you play them from the exact same spot in your stance. This simple change in philosophy changed my wife's game over night. She never could get used to varying the placement of the ball to accommodate the different lengths of her clubs. As soon as I put single-length clubs in her hands and told her to hit them out of the centre of her stance every time, her iron play improved.

Dave Everitt's picture

Submitted by Dave Everitt on

I agree that it is unfair to dismiss the one iron concept, when it is something that obviously works, for a lot of people. I myself, espouse the no iron philosophy and haven't had a single regular iron in my bag for 15 years and am able to play very well with a mix of Wedgewood and Taylormade hybrids and woods. As you and others have stated, maybe an unconventional swing that works so well, could find room for unconventional irons.

ecrimjr@gmail.com's picture

Submitted by ecrimjr@gmail.com on

I took the plunge about three- to four weeks ago. It has taken that long to get used to hitting the entire set I purchased the irons ( a demo set), the wedges and the driver and the seven iron. My golf game is a bit of a saga as I was about to give up on golf before I tried these. I also during the same time came back to the vertical swing after spending last year may two trying to learn a rotational swing that would work. Previously, I had taylor made burner 1 which had be fit to the extent that they could be from off the shelf. The results. I am playing better golf then ever. I can hit the entire set of irons and my wedges and the driver and wood hit really well. The driver I hit a very consistent 220-240 yards and very straight compared to a very variable 18-- 235 and usually in the wrong fairway. The clubs do not hit as far as my burners did as the lofts are not as hyped up. I would say the driver is the best I have owned and I should mention that the clubs lie angle actually match well with a vertical swing. In addition to clubs I am doing one other thing that I think is making as big if not a bigger difference. I am reading a book by Dr. Bob Rotella called the unstoppable golfer. It's focus is on the mental side of the game and it teaches you how to get out of your own head and focus while you are playing. There are so many mechanical elements that we can run through our head especially when we are searching for improvement in our games. Last year my negative self talk was brutal and it made me almost quit playing as the though of paying for the pleasure of beating myself up about my game. Now i am focusing on what I have to do with whatever shot I have before me and it is making a big difference in my game. In closing I will just say that I took a chance on the Irons. For me it was a final shot before giving the game up. I have also committed to the vertical swing. The two work well for me right now. I can hit every club in the bag well. Though the clubs that I hit far with burner I hit shorter so you will have to learn new distances on your clubs. They are very well built I was immediately impressed with the build quality of the clubs and the driver has the best feel of any driver I have owned. I don't thin this is an either or between doc and the 1 Iron golf. This is an either could work well for you. I Iron golf clubs do have an adjustment period. Mine as taken 3-4 weeks but I am very happy with them.
Ejcj

jon.lucenius's picture

Submitted by jon.lucenius on

Wow - lots of information and all appreciated. If I may summarize ...

1 - Lofted clubs are harder to hit - the shorter shafts in 1iron make them easier but you need less loft and more speed to make them go the same distance as regular clubs.

2 - Having consistency in your swing is a good thing. If you have the right regular clubs, each swing is the same, the shaft length and other factors get the club head speed up and combined with the loft hit the shots we know and love.

3 - Having a consistent place to hit the ball in your stance is a good thing as well. 1 Iron golf has achieved this by using the same shaft length. The benefit is off-set by a loss in length (somewhat) for the same effort as normal clubs. THIS can be overcome by increasing/changing swing speed, but that seems impractical at best.

4 - What you really need are clubs that match YOUR swing and YOUR game. We are not all power hitters, we have different goals, play on different courses, and have different levels of skill and knowledge.

5 - We have a nice and varied group of dedicated folks here with a surprisingly vast array of knowledge - thanks everyone.

** FINALLY ** The earlier post regarding the 1 Iron Set in actual use has convinced me to go with a custom set by Doc. He (poster) said his is length from LW-3i was 90-190. That is simply not enough range for me and I know I can do better with the set I get from Doc and get it fit just right.

Keep it straight,
Jon

kcochrane40@hotmail.com's picture

Submitted by kcochrane40@hot... on

Jon, I just want to clarify something in your first point so that you aren't operating under a misconception. You may have just mistyped.

The lofted clubs are easier to hit, not harder. The ball has to spin at a certain rate to stay aloft (if it spins too much, it "balloons"). It is easy to get the ball spinning with a more lofted club (think of your SW).

Almost all golfers have no problem getting their 7-PW spinning/airborne, many/most of us do not have problems with the 5-6 irons, but a lot of us have trouble with 4-iron and most have great difficulty with the 3-iron. These irons have little loft, so they need more swing speed than most of us generate to get them up and spinning so that they carry and fly true.

(By the way, many people are beginning to have trouble hitting the OEM 5- and 6-irons nowadays because in the effort to trick everyone into thinking their clubs go longer, the manufacturers have been slowly strengthening their lofts on their irons. The 5-iron of today has about the same loft as a weak 3-iron in the 1990s. As I said yesterday, many of today's off-the-rack 3-irons have the loft of the 1-iron of yesteryear.)

A second point that needs clarification is that you don't need to consciously generate more clubhead speed with the constant length (CL) irons (the 1-irons) to get your same distances and gaps between clubs. That is, you don't swing harder at the ball. It's true that you naturally generate slightly lower swing speeds because of the shorter shaft length but the CL clubs are built with their lofts adjusted so that the carry of the ball and the gaps between clubs is the same as with a regular set.

(By the way, it's not even guaranteed that you will generate slower clubhead speeds with a shorter club. We're not Iron Byron machines, and there are some variables at work in the human golfer that sometimes results in a shorter club actually being swung faster. That's why most people are far better off with a shorter, smaller headed driver than they are with a 46" driver with a watermelon-sized head on it.

There are quite a few different club variables that affect the length you hit the ball. That's why a good in-person fitting is always your best option. Length of shaft has less affect than a lot of people think, despite their use of high school physics and a slide ruler. I have three sets of irons (well, actually five, but besides my wife, who's counting). These are the lengths/lofts of the 5-irons:

- Snake Eyes 600Cs: 38 1/4"/27* loft
- SMT 303s: 37 3/4"/27* loft
- 1-Irons: 37"/27* loft

(I know, I know...I said in my original post that I hit the 1-Irons "exactly" the same length, but I figure a couple of yards -- the difference between my 1-Irons and my Snake Eyes -- is pretty close to "exact.")

I hit them all in the 180-185 range. The lower of the range is, in fact, the 1-Irons. However, I hit the SMTs the longest, which, as you'll notice, do not have the longest shaft on them. I believe that the weighting of this club is just right for me. They are a bit lighter of a club and I just naturally swing them faster (not trying to, just with the same swing -- again, that's why a fitting (in person if possible), is so important.)

jon.lucenius's picture

Submitted by jon.lucenius on

Thanks for comments - I did mean to say "LESS LOFTED" clubs are harder to hit. And apparently getting harder thanks to the manufacturers decrease in loft over the years. Perhaps this is to sell more hybrids or fairway woods. I still like PW-3 and a 3W in the bag. I do carry a 1-iron - an old Wilson with a tiny head - only use it from underneath trees or a similar situation.

I have a few older sets around as well. I should compare them in a similar fashion. One is a Ben Hogan muscle back set, other ones are cheap Ping knock-offs when I first started playing way back when.

Thanks,
Jon

kcochrane40@hotmail.com's picture

Submitted by kcochrane40@hot... on

Yes, actually it's not only to sell more hybrids, but this disappearing lofts is the reason hybrids even needed to be created. No one could hit the lower irons anymore.

The other consequence is that since the sand wedge has to be 55/56* for it to be effective out of the sand, its loft can't "move." As the lofts of all the other irons in the set went down over the years, there was an increasing gap in lofts between the PW and SW. Hence the need to create a gap wedge (and I think I read of another type of wedge that is on the way, but I'm not sure).

That's why I always cringe a bit when playing partners compare how long they are hitting, say, their eight irons in comparison to one another. They could very well be hitting clubs that are several degrees apart from one another, making the comparison meaningless. Personally, I think irons should have to come marked with a degree on the bottom of them, not a number. Then a comparison would be meaningful (assuming that the loft measurement was accurate, but don't even get me started on that. :) ) But then, if you believe in what Gio Vilante is saying in his book Fearless Golf, which I LOVE, we shouldn't be making these kinds of comparisons anyways.

Robert Meade's picture

Submitted by Robert Meade on

Funny, as you eluded to, the clubs often LIE about their lies and lofts. So even if it is marked as such it may not be whether on purpose (as it is on drivers that are often only the marked loft at the center of the club face if at all as they normally carry more loft than indicated) or the irons which simply may be off on both. This is why my loft and lie machine is my most valued tool. I check and make sure the gaps and lies are correct for me at least every 3/4 months year round. It has been clearly shown that even brand new clubs are likely off on the lofts and gaps between lofts and the lies might not be right either.

This as much as any other reason is why all should have their clubs checked and hit off lie boards at least once a year if they are frequent players. This is the number one most important and cheapest fix for all golfers.

Many on this blog have heard me say this several times but we are nearing the end of the season for many and now might be a great time to have ones clubs checked. Just saying.